China Aluminium Bifold Doors Manufacturers Suppliers Factory - Wholesale Service

Xuzhou Taihe Doors and Windows Co., Ltd

The founder established the predecessor of Taihe Doors and Windows, Runshi Doors and Windows, in a small workshop in Miaowan Village, driven by his keen insight into the construction market and entrepreneurial spirit. At that time, the founder held several roles, including salesman and quality inspector. Although the factory was small, with few employees and no established brand, each batch of goods shipped out was thoroughly inspected. Employees often worked overtime until late at night to ensure both the quality and quantity of goods were delivered to customers on time, laying a strong foundation for future development.

Aluminium Folding Doors
aluminium folding doors when you buy the first thing to look at is the appearance of aluminum alloy folding door, its appearance should be high flatness, and no burrs, texture clear.
read more
Aluminium Bi Fold Doors
aluminium bi fold doors when you buy the first thing to look at is the appearance of aluminum alloy folding door, its appearance should be high flatness, and no burrs, texture clear.
read more
Origin Bifold Doors
origin bifold doors when you buy the first thing to look at is the appearance of aluminum alloy folding door, its appearance should be high flatness, and no burrs, texture clear.
read more
2.4 m Aluminium Bifold Doors
Ultra slim bifold doors when you buy the first thing to look at is the appearance of aluminum alloy folding door, its appearance should be high flatness, and no burrs, texture clear.
read more
2.7 m Aluminium Bifold Doors
Taihe Windows and Doors suggests measuring quality by 2.7 m aluminium bifold doors and feeling the texture. A good quality folding door should not be too light or too heavy when sliding. There is...
read more
Ultra Slim Bifold Doors
Ultra slim bifold doors when you buy the first thing to look at is the appearance of aluminum alloy folding door, its appearance should be high flatness, and no burrs, texture clear.
read more
Ultra Slim Aluminium Bifold Doors
Hardware hidden in the profile, simple appearance, good anti-theft performance; sliding system is hidden in the profile cavity, uniform force, to avoid the accumulation of dust in the track;
read more
Best Aluminium Bifold Doors
Hardware hidden in the profile, simple appearance, good anti-theft performance; sliding system is hidden in the profile cavity, uniform force, to avoid the accumulation of dust in the track;
read more
3m Aluminium Bifold Doors
Taihe offers customizable 3m aluminium bifold doors to match the aesthetics of your home.
read more
Slim Frame Bifold Doors
If you are planning to install slim frame bifold doors for your building, Taihe will be your best choice.
read more
4m Aluminium Bifold Doors
4m aluminium bifold doors are neatly stacked on one side to create wide, unobstructed openings.
read more
Anthracite Grey Bifold Doors
Anthracite grey bifold doors, also known as accordion folding doors or folding sliding doors, consist of multiple panels that fold neatly to one side. This provides a spacious open space when...
read more

First 12 Last

Why choose us

Quality AssuranceI

The first batch of first-class qualification for professional contracting of metal doors and windows engineering of construction enterprises in the country ISO9001: 2015 international quality management system certification and national compulsory product certification (CCC).

Product Development

The company focuses on technology research and development and product quality improvement, and has organized personnel to visit the Nuremberg Window and Curtain Wall Expo in New York and the Noto headquarters in Germany for business inspections and technical exchanges.

Attentive Service

We have an experienced sales team, that can provide professional advice on door and window materials, styles, performance, prices, and other aspects according to your needs, and help you choose the most suitable products.

Advanced Equipment

WIt has more than 60 sets of advanced special production equipment and testing instruments for doors and windows in China.

Aluminium Bifold Doors

Items	Auminum window/door
Measurement	Can be customized
Type	Opened/Folading
Materials	Aluminum profile	Series	55/65/68/72/75/80/83/100/120etc.
		Construction	Thermal Break/Non- Thermal Break
		Thickness	1.4/1.6/1.8/2.0mm
		Surface treatment	Powder coated/anodized/PVDF/wood grain transfer / Electrophoresis, etc.
		Color	White/black/grey/brown/silver/wood color etc. can be customized
	Glass	Glass type	Tempered glass/laminated glass/coated glass/filmed glass/low-e glass/reflective glass /insulated glass etc.
		Glazing	Single/double/triple
		Thickness	Single: 5/6/8/10/12mm Double:5+5/6+6mm laminated glass/5+12A+5/6+12A+6mm insulated glass
		Color	Clear/frosted/tinted (grey, blue, light green, bronze etc.) can be customized.
	Hardware	Brand	As per your required.
	Screens	All the opened window and doors can be match the screens
		Stainless steel security mesh Nylon fly screen Retractable & invisible fly screen
Other information	Packages	Foam/bubble+ plywood
	Delivery	35-45 days after confirmed the deposit and drawing
	Trade Terms	EXW/FOB/CIF/DDU
	Main markets	North America/ Australia/Canada/Singapore/Sweden/Switzerland
	All the windows and doors can be customized as per your required.

Our product advantage

The door frame guide groove is a separate structure, which can effectively prevent the door from opening and has high anti-theft performance.

The profile is designed with a large section, the internal fan material adopts an integrated design, and the principle of equal pressure reduction between the outer frame and the internal fan improves the air tightness of the doors and windows. Torque resistance of windows and profiles themselves, impact of falling hammers, etc. Ensure that doors and windows are not easy to crack in cold areas.

The four corners of the door frame are made of stainless steel corner reinforcements, and the 45-degree angle is more accurate.

Comparing aluminium, uPVC and timber bi-fold doors

	Aluminium	UPVC	Timber
Cost	Higher initial cost but more durable so ultimately a cheaper investment.	Low initial cost but will need replacing sooner.	Most expensive and less durable than aluminium.
View	Best view as material is very strong so frames can be thin. The strength allows for larger panels so fewer panels are required.	Wider frames are needed so the view isn’t as good. Can only accommodate smaller panes of glass.	Wider frames are needed so the view isn’t as good.
Maintenance	Very low maintenance; only needs cleaning occasionally with soapy water.	Frames susceptible to warping and will look worn more quickly than alternatives; will require repainting.	Requires regular maintenance to protect the wood from infestation and warping.
Thermal efficiency	Incredibly thermally efficient as fitted with thermal breaks. Can also be fitted with triple-glazing.	Thermal efficiency varies greatly between uPVC window providers. Some can be more thermally efficient than aluminium and some can be less.	Naturally a good insulator but in varying weather conditions, timber can contract, causing draughts.
Durability	Aluminium is very strong and frames are powder coated to become durable, scratch-resistant. Origin doors come with a guarantee of up to 20 years.	UPVC can degrade when exposed to strong sunlight. Extreme weather can also cause the frames to warp.	Timber frames are tough but more susceptible to water leaks, contaminants and warping.
Aesthetic	Aluminium frames are available in timber effect, which looks incredibly authentic. You have a wide choice of colours. Aluminium offers a sleek and modern look, and can be customised to suit any homes aesthetic.	UPVC is considered the least attractive of the three options as the frames come in fewer colours and are usually bulkier.	Timber frames can be favoured on some traditional properties.
Flexibility of shape and layout	The material is very strong and flexible so complex layouts can be accommodated and the doors can be fully customised.	Less flexible than aluminium.	Less flexible than aluminium.

Designing bespoke bi-folding doors

Aluminium bi-folds are made-to-measure, and while there are some size restrictions, these won’t apply for most projects like residential door installations. Your bi-fold supplier can check this for you when visiting your property.

Aluminium is the superior choice for bi-folds thanks to its strength, meaning frames can be slimline yet strong enough to hold larger panes of glass than other materials. Having larger panels also means you’ll need fewer of them to fill the opening width.

Bi-fold sizes will depend on multiple factors, including how many panels you want installed in the space. Whatever your specifications, each door set will be made with your exact measurements in mind, creating bi-folds that fit the size of the opening. You can even choose b-folds for unusual spots such as bays and corners.

Our Ordering Process

Send Your Detailed Enquiry
Please send us a detailed inquiry and drawing. Include specifics such as size, layout, dimensions, color, material, and finish that you want for your windows project.

Get A Quotation
Kindly send us your project details and floor plan . We will quote for you within 24 hours ! We have 200+ sale teams in designing and manufacturing window in China .

Design for Free
After sending us your design and specifics, our sales team and engineers will offer 2-3 product solutions depending on your design and budget, subject to final approval.

Custom & Manufacturing
As soon as you approves, a contract shall be signed. From here, the customization and manufacturing process begin. .And our sales people would send you pictures of the production process and the finished product.

Shipping & Delivery
When the windows & doors completed and was packed, we would organize to load containers and shipping to your port .And we will support you to arrange trucks to transfer the products from destination port (warehouse) to your designated location .

FAQ

Q: What is your MOQ order?

A: We can accept small order even sample and with high quality.

Q: What is your manufacture time?

A: 25-35 days depends on deposit received and customer drawing signature.

Q: Do you accept customized designs and size?

A: Yes, sure. The design and size all are according to clients' customized choice.

Q: What's the favorite payment terms?

A: TT, LC, Paypal, West Union are available

Q: What is your color available?

A: Color available from our color swatch or real color samples

Q: What's your regular packaging?

A: With carton and EPE first and then put all windows on the wooden pallets and fix with EPE to keep it not moving in the container.

We're professional aluminium bifold doors manufacturers and suppliers in China. If you're going to wholesale bulk aluminium bifold doors made in China, welcome to get pricelist and quotation from our factory.

aluminium door for balcony, Black Aluminium Bifold Doors, aluminium bifolds