Hey there! As a supplier of Black Aluminium Bifold Doors, I've gotten tons of questions about installing handles on these bad boys. So, I thought I'd put together this blog post to walk you through the whole process. Whether you're a DIY enthusiast or just looking to save some bucks on installation, this guide is for you.
Why Black Aluminium Bifold Doors?
Before we jump into the handle installation, let me give you a quick rundown on why black aluminium bifold doors are so awesome. First off, they're super stylish. The black finish gives a modern and sleek look that can complement any home decor. Plus, aluminium is a durable material. It's resistant to rust and corrosion, which means your doors will last for years without losing their charm.
And if you're into energy efficiency, these doors are a great choice. They can help keep your home warm in the winter and cool in the summer, saving you some money on your energy bills. We also offer a variety of styles, like the Ultra Slim Aluminium Bifold Doors and Grey Bifold Doors, so you can find the perfect fit for your home.
Tools You'll Need
Alright, let's get to the installation part. First, you'll need to gather some tools. Here's a list of what you'll need:
- Screwdriver (both flathead and Phillips, depending on the screws that come with your handles)
- Drill (if you need to make holes for the handles)
- Measuring tape
- Pencil
- Safety glasses
- Level
Make sure you have all these tools handy before you start. It'll make the whole process a lot smoother.
Step 1: Measure and Mark
The first step in installing the handles is to measure and mark the spots where you'll be attaching them. Start by deciding where you want the handles to be placed. Most people like to have them at a comfortable height, usually around waist level.
Use your measuring tape to measure the distance from the top or bottom of the door to the desired handle position. Mark this spot with a pencil. Then, measure the width of the handle and mark the center point on the door. This will ensure that the handle is centered and looks nice.
Step 2: Check the Door
Before you start drilling or screwing, it's important to check the door to make sure it's in good condition. Look for any cracks, dents, or other damage that could affect the installation. If you find any issues, it's best to fix them before proceeding.
Also, make sure the door is clean and free of any dirt or debris. This will help the handles adhere better and look nicer.


Step 3: Drill the Holes (if necessary)
If your handles require drilling, this is the step where you'll do it. Use your drill to make holes in the marked spots on the door. Make sure the holes are the right size for the screws that come with the handles. You can use a drill bit that's slightly smaller than the screws to ensure a tight fit.
When drilling, wear your safety glasses to protect your eyes from any flying debris. And be careful not to drill too deep, as this could damage the door.
Step 4: Attach the Handles
Once the holes are drilled (if necessary), it's time to attach the handles. Line up the handle with the holes on the door and insert the screws. Use your screwdriver to tighten the screws, but don't over-tighten them. This could strip the threads or damage the door.
If your handles don't require drilling, you can simply use the provided adhesive to attach them to the door. Make sure to follow the instructions on the adhesive carefully for the best results.
Step 5: Check the Alignment
After attaching the handles, use a level to check if they're straight. If they're not, you can loosen the screws slightly and adjust the handle until it's level. Then, tighten the screws again.
This step is important because it ensures that the handles look nice and function properly. You don't want a handle that's crooked or wobbly.
Step 6: Test the Handles
Once you're satisfied with the alignment, it's time to test the handles. Open and close the door a few times to make sure the handles work smoothly. If you notice any issues, like the handles not turning or the door not closing properly, you may need to adjust them further.
Tips and Tricks
- If you're not sure about the installation process, you can always watch some YouTube videos for additional guidance. There are tons of DIY installation videos out there that can give you a better idea of how to do it.
- When choosing handles, make sure they're compatible with your black aluminium bifold doors. You can check the product specifications or ask us for recommendations.
- If you're installing multiple doors, make sure the handles are installed at the same height and position on each door for a consistent look.
Conclusion
Installing handles on black aluminium bifold doors isn't as hard as it may seem. With the right tools and a little bit of patience, you can do it yourself and save some money. Just follow the steps outlined in this guide, and you'll have your handles installed in no time.
If you're interested in purchasing our Best Aluminium Bifold Doors or have any questions about the installation process, feel free to reach out to us. We're here to help you make the right choice for your home.
References
- General knowledge about door installation and aluminium doors.
- Experience from installing handles on black aluminium bifold doors as a supplier.
