The Main Causes Of Rainwater Leakage in Aluminum Doors And Windows Can Be Roughly Divided Into Four Categories

Jan 15, 2025

Leave a message

1: Defects in the structure of doors and windows during the design process are caused by: 2. Failure to meet quality requirements during processing and installation; 3. Inconsistent materials and accessory materials; 4. Improper sealing treatment at the connection with the opening wall.
The leakage phenomena caused by items one and four among these four categories are more harmful and difficult to deal with. In addition, there are also defects in the building structure itself that cause rainwater leakage at the connection between doors and windows and the opening wall, but this does not belong to the leakage problem of doors and windows.
A, The waterproof structure design of aluminum doors and windows is unfair, the waterproof sealing layer is insufficient, and the drainage channel inside the aluminum door and window structure cavity is not formed. When rainwater easily enters the aluminum door and window cavity and enters the room under the pressure difference between indoor and outdoor air, but the rainwater entering the aluminum door and window cavity cannot be smoothly discharged outside through the aluminum door and window drainage system and remains inside the door and window, causing water accumulation and leakage.
B, The structural strength and rigidity of aluminum doors and windows did not meet the requirements for wind pressure resistance in the location where they are used, resulting in severe plastic deformation, tearing or damage to the load-bearing members, hardware accessories, seals and adhesive materials of aluminum doors and windows under normal wind loads, leading to the failure of the door and window body seal and rainwater leakage. The reason is that the product failed to accurately calculate and design its strength according to specifications, and did not pass the physical function test for wind pressure resistance before production and installation
C, Improper selection of aluminum alloy doors and windows in the process of architectural design is also one of the reasons for rainwater leakage from doors and windows. The most common method is to use ordinary sliding aluminum doors and windows for the exterior facade of high-rise buildings or areas with high rainfall, without taking necessary waterproof measures in the structure of the aluminum doors and windows or in the structure of the building.
D, When installing aluminum doors and windows on site, the assembly size control is not good, resulting in misalignment or insufficient overlap size of the overlapping sealing positions, or gaps due to sufficient pressure. The fastening screws used to fix the door and window frames are not sealed with sealant, and the surface of the sealing parts is not cleaned when sealing with sealant.

Send Inquiry
Credit guarantee
Many years of industry experience
good reputation
contact us